Challenger SRT-8 V8-6.1L (2009)
1. Route the seat belt through the opening in the trim panel and Install the lower quarter trim panel to the vehicle.
2. Carefully seat the lower quarter trim panel (2) engaging the retainers.
3. Install the seat belt opening cover (3).
4. Install the fasteners (1 and 4).
5. Install the lower seat belt anchor.
6. Install the sill plate.
A-Pillar Trim Panel-Removal
REMOVAL
1. Using a trim stick or another suitable wide flat-bladed tool, carefully pry the upper end of the A-pillar trim (2) rearward from the inside of the
A-pillar far enough to disengage the two spring clip retainers that secure the trim to the slots in the pillar.
2. Disconnect the A-pillar tether from the body side A-pillar (1).
3. Disengage the base of the A-pillar trim from the end of the instrument panel top cover.
4. Remove the A-pillar trim from the vehicle.
A-Pillar Trim Panel-Installation
INSTALLATION
