Challenger SRT-8 V8-6.1L (2009)
Power Door Lock Switch: Service and Repair
Power Lock Switch - Removal
REMOVAL
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Disconnect and isolate the negative battery cable.
2. Remove the door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal.
3. Using a flat-bladed tool, remove the window/lock switch (2) from the door trim panel.