Challenger SRT-8 V8-6.1L (2009)
Parking Brake Cable: Service and Repair
Removal
Front Cable
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair.
NOTE: Due to short travel and low spring tension, it is not necessary to lock-out parking brake lever to service parking brake components.
2. Disconnect front parking brake cable (5) at connector (3) to right rear parking brake cable (4) above axle differential (not shown).
3. Remove front cable (3) from equalizer (2).
