Challenger SRT-8 V8-6.1L (2009)
6. Connect vacuum hose (3) to check valve (2) on face of booster (1). Do not remove check valve from booster.
7. Install master cylinder (1) See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Brake Master Cylinder -
Installation.
8. Install windshield wiper module See: Wiper and Washer Systems/Wiper Motor Linkage/Service and Repair/Wiper Arm Linkage - Installation.
9. Connect negative battery cable (2).
10. Fill and bleed brakes as necessarySee: Brake Bleeding/Service and Repair.