Challenger SRT-8 V8-6.1L (2009)
3. Loosen the rocker shafts using the sequence provided.
CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an "I".
4. Remove the rocker shafts. Note location for reassembly.
CAUTION: The longer pushrods are for the exhaust side, and the shorter pushrods are for intake side.
5. Remove the pushrods. Note pushrod location for reassembly.
CAUTION: Do not remove the retainers from the rocker shaft. The assembly tangs (1) at the bottom of the retainers can be damaged, causing
the assembly tangs to break off, and get into the engine.
