Challenger SRT-8 V8-6.1L (2009)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Removal
REMOVAL
1. Disconnect negative cable from battery (1).
2. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Removal.
3. Drain cooling system See: Cooling System/Service and Repair.
4. Remove radiator upper hose.
5. Remove fan shroud See: Cooling System/Radiator Cooling Fan/Service and Repair/Cooling Fan - Removal.
6. Remove vibration damper bolt.
7. Insert Crankshaft Insert 8513A (2) in the end of the crankshaft.
8. Remove damper with puller 1023 (1).
