Challenger SRT-8 V8-6.1L (2009)
18. Position the steering gear (2), install mounting bolts (1) and tighten to 95 Nm (70 ft. lbs.).
19. Install the engine mount nuts (1,2) and tighten to 95 Nm (70 ft. lbs.).
20. Lower the vehicle.
21. Install the cylinder head(s) See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.
22. Install the intake manifold See: Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Installation.
23. Position the air cleaner housing (2), install the air cleaner housing retaining bolt (3) and securely tighten.
24. Connect the makeup air hose (1).
25. Connect the intake air temperature sensor (4) electrical connector.
26. Connect the air duct to the throttle body and tighten clamp to 3 Nm (30 in. lbs.).
27. Fill the engine with oil See: Engine Lubrication/Engine Oil/Service and Repair.
