Challenger SRT-8 V8-6.1L (2009)
CAUTION: The piston must be at TDC, and both valves closed on the cylinder to be serviced.
NOTE: The intake push rods can fall into the engine and become lodged in the oil pan, if removing intake rocker arm shaft, install the
pushrod retainer 9070 (1) to retain the intake push rods (2).
7. Install the pushrod retainer 9070 (1) onto the cylinder head.
8. Clip the pushrods (2) into pushrod retainer (1).
9. Using the sequence shown, remove the rocker arm shaft bolts and remove the rocker arm shaft.
