Challenger SRT-8 V8-6.1L (2009)
5. Remove the air cleaner housing (1) and clean air tube (2).
6. Disconnect electrical connectors for the following components:
-
Manifold Absolute Pressure (MAP) Sensor
-
Short runner valve (SRV)
-
Fuel Injectors
-
Electric Throttle Control (ETC )
7. Disconnect the brake booster hose, purge hose, and Make Up Air Hose (MUA).
NOTE: Remove the intake manifold and throttle body as an assembly.
8. Using the sequence shown, remove the intake manifold retaining fasteners
9. Remove intake manifold as an assembly.
Intake Manifold - Installation
INSTALLATION
