Challenger SRT-8 V8-6.1L (2009)
1. Position the LH resonator assembly (5) into the vehicle.
2. Install the isolators (1).
3. Install the ball flange nuts (2). Tighten the nuts finger tight.
4. Check clearance between the LH resonator assembly and the fuel tank. Clearance is 14mm (.55 in.).
5. The tailpipe should be centered in the rear fascia opening.
6. Tighten ball flange nuts (2) to 47 Nm (35 ft. lbs.).
7. Lower the vehicle.
8. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
