Challenger SRT-8 V8-6.1L (2009)
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle See: Vehicle Lifting/Service and Repair.
4. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
5. Remove hose clamp, then return hose (1) at cooler (2).
6. Remove screw (4) fastening routing clamps securing pressure (1) and return (2) hoses to right side of engine cradle (3).
7. Unthread return hose tube nut (3) from steering gear (1).
