Challenger SRT-8 V8-6.1L (2009)
8. Slide return hose (1) onto end of cooler (2). Install clamp securing hose in place.
9. Install belly pan See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation.
10. Lower vehicle.
11. Connect negative battery cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
12. Fill and bleed power steering system. See: Steering and Suspension/Steering/Service and Repair/Steering - Power Steering System Bleeding
Return Hose - Cooler to Reservoir
COOLER TO RESERVOIR
