Challenger SRT-8 V8-6.1L (2009)
A long tether extends down the A-pillar from the front of the airbag cushion. A short tether is secured near the top of the C-pillar.
The hybrid-type inflator for each airbag is secured to the roof rail at the rear of airbag, back by the C-pillar. The entire assembly is secured to the inside
of the roof rail with screws.
An airbag squib harness connector is routed to the rear of the airbag inflator. The body harness then connects the curtain airbag to the Occupant Restraint
Controller (ORC).
The curtain airbag cannot be adjusted or repaired and must be replaced if deployed, faulty, or in any way damaged. Once a curtain airbag has been
deployed, the complete airbag, headliner, upper A, B, and C-pillar trim, and all other visibly damaged components must be replaced.
