Challenger SRT-8 V8-6.1L (2009)
4. Install the screws (3) that securing the curtain airbag (2) to the spring nuts in the roof side rail. Tighten screws to 5 Nm (44 in. lbs.).
5. Connect the curtain airbag squib electrical connector (2) to the inflator (3).
6. Install the headliner into the vehicle. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
Driver Air Bag - Removal
REMOVAL