Challenger SRT-8 V8-6.1L (2009)
Remote Switch: Service and Repair
Remote Radio Switches - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Connect the electrical connector to the switch.
2. Position the switch and press it into place.
3. Install the driver airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Installation
4. Connect the battery negative cable.
