Challenger SRT-8 V8-61L (2009) Oil Pressure Sensor Removal
Oil Pressure Sensor: Service and Repair
Oil Pressure Sensor - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the accessory drive belt See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Removal
3. Remove the upper generator mounting bolt.
4. Raise and support the vehicle.
5. Remove the lower splash shield retaining bolts (1) and the splash shield.
6. Remove the lower generator retaining bolts (1).
7. Lower the vehicle.
8. Position the generator aside to gain access to the oil pressure sensor.
