Challenger SRT-8 V8-6.1L (2009)
Dealers should perform this repair on all unsold vehicles before retail delivery. Dealers should also use the VIN list to follow up with all owners to
schedule appointments for this repair.
VIN lists may contain confidential, restricted owner name and address information that was obtained from the Department of Motor Vehicles of various
states. Use of this information is permitted for this notification only and is strictly prohibited from all other use.
Additional Information
If you have any questions or need assistance in completing this action, please contact your Service and Parts District Manager.
Customer Services Field Operations
Chrysler Group LLC
Service Procedure
1. Replace the battery negative ground cable using the following procedure:
a. Turn the ignition switch to the "Off" position. Be certain that all electrical accessories are turned off.
b. Remove the load floor cover to gain access to the battery.
c. Disconnect and isolate the battery negative ground cable clamp (Figure 1).
d. Remove the fastener securing the battery negative ground cable to the body (Figure 1).
e. Remove the battery negative ground cable from the vehicle and discard the old cable.
f.
Position the new battery negative ground cable in the vehicle.
g. Install the fastener securing the battery negative ground cable to the body. Tighten the fastener to 44 in. lbs. (5 N.m).
2. Replace the battery using the following procedure:
NOTE:
Vehicles equipped with a police package (sales code AHB) do not require battery replacement. If the vehicle is equipped with a
police package, continue with Step 3 of this procedure.
