Challenger SRT-8 V8-6.1L (2009)
a. Remove and save the nut securing the transmission negative ground cable to the right front strut tower (Figure 4).
b. Remove the transmission negative ground wire eyelet from the strut tower stud.
c. Raise vehicle on an appropriate hoist.
d. Remove and save the nut securing the transmission negative ground cable to the transmission bellhousing stud. (Figure 5).
e. Vehicles equipped with an automatic transmission, relocate the transmission dipstick brace from the transmission bellhousing stud (Figure 5).
f.
Remove and discard the transmission negative ground cable from the vehicle.
g. Route the new transmission negative ground cable in the vehicle.
h. Install the transmission negative ground cable eyelet onto the transmission stud.
i.
Vehicles equipped with an automatic transmission, position the transmission dipstick brace onto the transmission stud (Figure 5).
j.
Install the nut securing the transmission negative ground cable and dipstick brace to the transmission housing. Tighten the nut to 97 in. lbs. (11
