Challenger SRT-8 V8-6.1L (2009)
Power Steering Pump: Service and Repair
Power Steering Pump - Removal
REMOVAL (5.7L/6.1L)
1. Disconnect and isolate the negative battery cable (2).
2. Remove the engine cover (1).
3. Disconnect the intake air temperature (IAT) sensor (5) connector.
4. Loosen the clamps at the throttle body and the air filter assembly and remove the clean air tube (4).
5. Remove the make up air hose (MUA) (2).
6. Remove the air filter assembly retaining bolt (3).
7. Lift the air filter assembly out of the vehicle.
