Challenger SRT-8 V8-6.1L (2009)
Steering Column Cover: Service and Repair
Steering Column Shroud - Removal
Steering Column Shroud
REMOVAL
The steering column shroud is part of the Steering Column Control Module (SCCM). Remove and disassemble the SCCM.See: Relays and Modules -
Steering/Steering Mounted Controls Communication Module/Service and Repair/Removal and Replacement/Steering Column Control Module -
Removal See: Relays and Modules - Steering/Steering Mounted Controls Communication Module/Service and Repair/Overhaul/Steering Column
Control Module - Disassembly
Steering Column Shroud, Roll Top
REMOVAL
WARNING: Before servicing the steering column the airbag system must be disarmed. Refer to electrical restraint system for service
procedures. Failure to do so may result in accidental deployment of the airbag and possible personal injury or death.
1. Access and remove the steering column control module (SCCM) (1) from the column See: Relays and Modules - Steering/Steering Mounted
Controls Communication Module/Service and Repair/Removal and Replacement/Steering Column Control Module - Removal.
2. Remove the steering column opening cover (1). See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Removal.
3. Remove the steering column opening reinforcement (1).
4. Remove the cluster bezel. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Cluster
Bezel - Removal
