Challenger SRT-8 V8-6.1L (2009)
8. Install three nuts (2) fastening shock assembly (4) to shock tower (3). Tighten nuts to 27 Nm (20 ft. lbs.).
9. If equipped, align shock tower cap (1) with shock mounting nuts (2) and snap into place.
Rear Suspension Coil Spring(s) - Removal
REMOVAL
1. Raise and support vehicle, See: Wheels and Tires/Vehicle Lifting/Service and Repair.
.
2. On both sides of vehicle, remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
