Challenger SRT-8 V8-6.1L (2009)
4. If separated, install upper mount (1) onto coil spring (2). Match step in upper isolator to end of spring coil.
5. Install lower spring isolator (2) on shock body (3).
6. Install jounce bumper (4) on shock shaft, small end first.
7. Install shock through bottom of coil spring until lower spring isolator (on shock) contacts lower end of coil spring. Match step built into isolator
(1) to lower coil end (2).
8. Install clamp to hold shock and coil spring together.
