Challenger SRT-8 V8-6.1L (2009)
Thermostat: Service and Repair
Thermo Bypass Valve - Installation
INSTALLATION
1. Position thermal bypass valve. Install mounting bolt. Tighten mounting bolt to: 3.5L engine to 26 Nm (19 ft.lbs.) and 5.7L/6.1L engine to 50 Nm
(37 ft. lbs.).
2. Install rear transmission cooler lines to thermal bypass valve. Tighten fittings to 20 Nm (18 ft. lbs.).
3. Install front transmission cooler lines to thermal bypass valve. Tighten fittings to 20 Nm (18 ft. lbs.).