Challenger SRT-8 V8-6.1L (2009)
Valve Body: Overhaul
Electrohydraulic Control Unit - Disassembly
DISASSEMBLY
Electrical Unit Components
1. Remove electrohydraulic unit from the vehicle. See: Service and Repair/Removal and Replacement/Electrohydraulic Control Unit - Removal
2. Remove solenoid caps (1, 2) if equipped.
3. Unscrew Torx(R) socket bolts (3, 4).
NOTE: Pay attention to the different lengths of the Torx(R) socket bolts.
4. Remove leaf springs (5).
5. Withdraw solenoid valves (6 - 11) from shift plate (13).
NOTE: Check O-rings on solenoid valves for damage and replace if necessary.
6. Bend away retaining lug on stiffening rib on transmission oil temperature sensor.
7. Remove electrohydraulic control module (12) from the shift plate (13).
