Challenger SRT-8 V8-6.1L (2009)
5. Reconnect the stop lamp switch harness connector (1).
NOTE: Use a new clip for reassembly.
6. Reconnect the brake booster push rod (2), and install a new clip (1).
7. If necessary bleed the hydraulic system See: Service and Repair.
8. Install steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Steering
Column Opening Cover - Installation.
9. Install driver side silencer under instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Silencer Panel - Installation.
10. Install the driver side knee bolster.
11. Connect negative battery cable to battery post See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
