Challenger SRT-8 V8-6.1L (2009)
6. Remove propeller shaft rear coupler-to-flange bolts.
7. Remove center bearing (1) mounting bolts.
8. With the aid of a helper, remove propeller shaft assembly (3).
COUPLER/DAMPER SERVICE
1. Remove three coupler-to-propeller shaft bolt/nuts. Note orientation and direction of components during disassembly. To avoid driveline vibration
or damage, it is critical that all components are reinstalled in their original orientations
2. Separate coupler (1) and damper (3) (if equipped) from propeller shaft. Note orientation and direction of components during disassembly. To
avoid driveline vibration or damage, it is critical that all components are reinstalled in their original orientations.
