Dodge Workshop Service and Repair Manuals > Challenger SRT-8 V8-6.1L (2009) > Transmission and Drivetrain | Drive/Propeller Shafts, Bearings and Joints | Drive/Propeller Shaft | Component Information | Service and Repair | Propeller Shaft - Removal

Page 7

8. Torque center bearing-to-body bolts to 27 Nm (20 ft. lbs.).

9. Install heat shield (1).

10. Install rear exhaust system.See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair/Installation

Dodge Workshop Service and Repair Manuals