Challenger SRT-8 V8-6.1L (2009)
Front Door Window Regulator: Service and Repair
Front Door Window Regulator - Removal
REMOVAL
1. Remove the trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Removal.
2. Remove the speaker. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Speaker - Removal
3. Remove the watershield.See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door
Watershield - Removal.
4. Adjust the front door glass position up or down as required for access to the two window regulator glass clamps.
5. Loosen the screw in each of the glass clamps far enough to release the glass.
6. Lift the glass out of the regulator clamps and into its full up position, then tape the glass securely into place.
7. Remove the power window motor fasteners (1) and disengage the motor bracket from the door.
8. Remove the window regulator mounting fasteners (2).
9. Disconnect the electrical connectors.
10. Carefully remove the regulator (1) through the large access hole (2) at the rear of the door.
