Challenger SRT-8 V8-6.1L (2009)
Wiper Motor Linkage: Service and Repair
Wiper Arm Linkage - Installation
INSTALLATION
1. Inspect the grommet (1) that the wiper motor sits in. If cracked, brittle, or damaged, replace the grommet (1).
2. While positioning the wiper module in its mounting location, make sure that the dowel on the bottom of the wiper motor (1) slides into the
mounting grommet (2) correctly.
3. Install the two retaining bolts (1 and 4). Torque bolts to 8 Nm (70 in. lbs.).
