Charger L4-135 2.2L SOHC VIN 8 2-bbl HP (1986)
Control Assembly: Service and Repair
Heater-A/C Control Replacement
Automatic Temperature Control (ATC)
1. Reach under instrument panel to disengage headlamp switch knob release button on switch and pull knob and shaft assembly from switch.
2. Remove lower left bezel attaching screws and bezel.
3. Remove control assembly mounting screws and pull control assembly rearward.
4. Disconnect wiring, cables and vacuum lines, then remove control assembly.
5. Reverse procedure to install.
Manual Air Conditioning
1. Reach under instrument panel to disengage headlamp switch knob release button on switch and pull knob and shaft assembly from switch.
2. Remove lower left bezel attaching screws and bezel.
3. Remove control assembly mounting screws and pull control assembly rearward.
4. Disconnect wiring, cables and vacuum lines, then remove control assembly.
5. Reverse procedure to install.
