Charger L4-135 2.2L SOHC VIN 8 2-bbl HP (1986)
2.
Remove the ambient temp sensor from the fan mounting bracket and discard it.
3.
Use electrical tape or tie wraps to secure the connector to the fan wire harness.
4.
The fan may still after-run for only one engine shut down due to the timer memory.
INSTALL APPROPRIATE VAPOR LOCK/FUEL FOAMING KIT (IF NOT PREVIOUSLY INSTALLED)
1.
Refer to Technical Service Bulletin 18-24-86 REVISION A for installation instructions.
POLICY:
Information only
