Charger L4-97 1589cc 1.6L VIN A (PEUGEOT) 2-BBL (1986)
_2-bbl/Page-571001.png)
Differential Axle Housing: Service and Repair
Rear Axle & Suspension Assembly
EXC. HORIZON, OMNI, CHARGER & TURISMO
1. Raise and support vehicle, support rear axle, and remove rear wheels.
2. Disconnect parking brake cable at connector and cable housing at floor pan bracket.
3. Disconnect brake tube assembly from brake line on trailing arm support bracket, and remove lock.
4. On 1986---88 models equipped with automatic load leveling, disconnect link from sensor to track bar.
5. Disconnect shock absorbers and track bar at rear axle. Support track bar end.
6. Lower axle until spring and isolator assemblies, come free and can be removed.
7. Support pivot ends of trailing arms and remove pivot bracket bolts. Lower and remove axle from vehicle.
8. Reverse procedure to install. Torque brake tube assembly to hose fitting to 140 inch lbs. Torque other components as shown.