Charger V6-2.7L (2008)
Garage Door Opener Transmitter: Service and Repair
Installation
INSTALLATION
NOTE: In addition to the Universal Transmitter operation the Electronic Overhead Module is responsible for some of the compass functions.
Anytime the Electronic Overhead Module is replaced the compass variance value must be set, See: Instrument Panel, Gauges and Warning
Indicators/Compass/Service and Repair/Procedures/Compass Variance Adjustment - EVIC.
1. Position the universal transmitter onto the overhead console assembly and install the retaining screws (2).
2. Install the overhead console assembly, See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhead Console -
Installation.
3. Connect the battery negative cable.
4. Program the universal transmitter codes, See: Testing and Inspection/Programming and Relearning.
