Charger V6-2.7L (2008)
3. Remove Upper caliper guide pin bolt (1). To do so, hold the guide pin (3) stationary while turning bolt.
4. Rotate caliper downward (5), exposing brake pads (2 and 3). Use care not to overextend brake hose when doing this or damage may occur.
5. Remove inboard (2) and outboard (3) brake pads from caliper adapter (4).
6. If necessary, remove anti-rattle clips (1) from upper and lower abutments of adapter (4).
Front/Rear - SRT8
REMOVAL
NOTE: Review all Warnings and Cautions. See: Service Precautions/Brakes - Warning
1. Raise and support vehicle. See: Maintenance/Vehicle Lifting/Service and Repair
NOTE: Perform STEP 2 through STEP 8 on each side of vehicle to complete pad set removal.
