Charger V6-2.7L (2008)
Engine Block Heater: Description and Operation
Engine Block Heater - Description
DESCRIPTION
The engine block heater (1) is mounted in the cylinder block (2), near the right rear corner. The block heater is a dry cylinder type design and is powered
by 110 volt AC. The power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds and
become damaged.
The engine block heater (1) is mounted in the cylinder block, near the left rear corner. The block heater is a dry cylinder type design and is powered by
110 volt AC. The power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds and
become damaged.