Charger V6-2.7L (2008)
6. Connect the fuel injector electrical connectors (2).
NOTE: Make sure fuel injectors are located in the correct location and position, as upper intake manifold interference could occur.
7. Connect fuel supply hose (1) to fuel rail. See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair
8. Install upper intake manifold. See: Intake Manifold - Installation
Upper Intake Manifold
Installation
1. Clean and inspect sealing surfaces. Gaskets can be reused, if free of cuts or tears.
NOTE: Make sure fuel injectors and wiring harnesses are in correct position to not interfere with upper manifold installation.
2. Install upper manifold gasket.
3. Position upper manifold onto lower manifold.
4. Install manifold attaching bolts and tighten in sequence shown to 12 Nm (105 in. lbs.).
5. Connect PCV, brake booster, and vapor purge hoses.
