Charger V6-2.7L (2008)
6. Remove primary timing chain tensioner retainer cap (2) and tensioner (1) from right cylinder head.
7. Disconnect and remove camshaft position sensor (4) from left cylinder head.
8. Remove timing chain guide access plugs (3) from cylinder heads.
NOTE: When camshaft sprocket bolts are removed, the camshafts will rotate in a clockwise direction.
9. Starting with the right camshaft sprocket, remove the sprocket attaching bolts. Remove camshaft damper (1) (if equipped) and sprocket.
10. Remove left side camshaft sprocket attaching bolts and remove sprocket.
11. Remove lower chain guide (7) and tensioner arm (8).
12. Remove the primary timing chain (5).
13. For removal of crankshaft sprocket (6), See: Cylinder Block Assembly/Crankshaft/Service and Repair/Removal and Replacement/Crankshaft -
Removal.
Crankshaft Sprocket
CRANKSHAFT SPROCKET
