Charger V6-2.7L (2008)
Map Light: Service and Repair
Reading Lamp - Installation
INSTALLATION
OVERHEAD CONSOLE
1. Firmly push the lamp into the overhead console.
2. Place the tab inside the rear edge of the overhead console. Carefully push down on the side of the lens opposite from the tab side, making sure to
snap in both sides of the lens.
3. Connect the battery negative cable.
REAR
1. Firmly push the lamp (1) into the reading lamp unit.
2. Looking at the lamp unit place the right side in first and make sure the tabs are under the lip of the unit. Slide right and then firmly snap lens (1)
into place.
3. Connect the battery negative cable.