Charger V6-2.7L (2008)
Wheel Bearing: Service and Repair
Front Hub / Bearing - Removal
AWD
AWD
1. Raise and support vehicle. See: Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then tire and wheel assembly (1).
3. While a helper applies brakes to keep hub from rotating, remove hub nut (1) from the axle half shaft (2).
4. Access and remove front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal