Charger V6-2.7L (2008)
4. Install the screws (1) that secure the curtain airbag to the spring nuts in the roof side rail. Torque screws to 5 Nm (44 in. lbs.).
5. Connect the curtain airbag squib connector (2) to the inflator (3).
6. Install the headliner into the vehicle See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
WARNING: DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST. FOR THE SYSTEM TEST, See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
