Charger V6-2.7L (2008)
Headlamp Dimmer Sensor: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the defroster grille See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Defroster
Grille/Removal.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the auto headlamp sensor (1).
4. Pull the sensor from the top of the instrument panel.
5. Disconnect the one electrical connector.