Charger V6-2.7L (2008)
18. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See: Wheels and
Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
19. Lower vehicle.
20. Perform wheel alignment. See: Alignment/Service and Repair
Left Link
LEFT LINK
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. On both sides of vehicle, remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
WARNING: Before opening fuel system, review all Warnings and Cautions.
