Charger V6-2.7L (2008)
5. On each side of crossmember, Install bolt and nut (1) mounting each compression link (3) at crossmember. Do not tighten at this time.
6. On each side of crossmember, slide cam bolt (2) attaching toe link through crossmember and link (1) from rear.
7. On each side of crossmember, while holding toe adjustment cam bolt from rotating, install cam washer (2) and nut (3) securing toe link at
crossmember (1). Do not tighten at this time.
8. On each side of crossmember, install bolt and nut (1) fastening spring link (4) to crossmember. Do not tighten at this time.