Charger V6-2.7L (2008)
2. Utilizing slit in isolator, install each stabilizer bar isolator (1) on bar resting against locating collar (2) as shown. Make sure slit in isolator is
positioned toward rear of vehicle.
3. On each side of vehicle, install stabilizer bar isolator retainer halves (1)(2) around isolator (3).
4. On each side of vehicle, install bolts (2) securing stabilizer bar isolator retainer halves (1) to cradle. Tighten bolts to 60 Nm (44 ft. lbs.).
5. On each side of vehicle, install stabilizer bar heat shield (3) over stabilizer bar isolator retainer. Install mounting screws (1).