dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Automatic Transmission/Transaxle > < Torque Converter Clutch Solenoid, A/T|Removal

Charger V6-2.7L (2008)

Page 1
background image

Torque Converter Clutch Solenoid: Service and Repair
Installation

INSTALLATION

NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. 

1. Install Solenoid/Pressure Switch Assembly (1) and screen (3) to the separator and transfer plates.

2. Install and tighten retaining screws (2) to 5.5 Nm (50 in. lbs.) torque.
3. Install valve body. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and Replacement/Installation

Automatic Transmission/Transaxle > < Torque Converter Clutch Solenoid, A/T|Removal