Charger V6-2.7L (2008)
Overdrive Solenoid: Service and Repair
Removal
REMOVAL
NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.
1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/Removal
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid.
4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2).