Charger V6-2.7L VIN T (2007)
Trunk / Liftgate Stop: Service and Repair
Installation
Lower
LOWER
1. Position the lower bumper (2) to the rear fascia flange that extends over the deck opening lower panel.
2. Secure the bumper with a push-pin fastener.
3. Close the deck lid.
Upper
UPPER
1. Screw the upper bumper (2) into the hole in the lower flange of the deck lid inner panel (1).
2. Thread the bumper in or out of the deck lid as necessary to achieve proper deck lid closing and alignment.
3. Close the deck lid.