Charger V6-2.7L VIN T (2007)
Underbody Cover: Service and Repair
Installation
INSTALLATION
NOTE: During installation, ensure rear belly pan is shingled underneath front belly pan. Failure to do so may result in damage to belly pan.
1. Position the rear belly pan (2) to the underside of the vehicle.
2. Install the screws (1) that secure the rear belly pan to the underside of the vehicle. Tighten the screws securely.
3. Position the front belly pan (2) to the underside of the vehicle.
4. Install the screws (1) that secure the front belly pan to the underside of the vehicle. Tighten the screws securely.
5. Lower the vehicle.