Charger V6-2.7L VIN T (2007)
8. Back off nut (3) from bolt (1) attaching shock clevis bracket (2) to lower control arm (7) until it is flush with end of bolt.
9. Using a brass drift punch, tap the bolt out of the clevis bracket until bolt serrations clear bracket.
10. Remove nut (3) and bolt (1) for clevis bracket and control arm.
11. Install engine support tool #8534.
12. Remove upper airbox inlet tube.
13. Install left and right engine lift bracket to cylinder head.
14. Remove the front belly pan. Refer to Underbody Cover.
