Charger V6-2.7L VIN T (2007)
66. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
67. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
68. Perform wheel alignment, paying special attention to thrust angle. If rear crossmember needs to be shifted to align thrust angle, try to avoid
compromising tension link clearance.
69. On each side of crossmember, while holding cam bolt from turning, tighten toe link cam bolt nut (2) to 108 Nm (80 ft. lbs.) torque.